The adsorption process can be well described by the pseudo-second-order kinetic model. Results of zeta potential, contact angles and infrared spectrum showed TMP replacing proteins embedded into the cell membrane enhancing the TMP adsorption capacity of activated sludge after EPS extraction. Our results demonstrated that less proteins in EPS of activated sludge is more beneficial for TMP adsorption removal.Dyes are hazardous compounds commonly found in industrial wastewaters. Efficient and inexpensive removal of dye molecules from the water matrix has been demonstrated by adsorption processes. Magnetic nano-adsorbents, such as metal ferrites, can be efficiently recovered from the reaction mixture after treating the pollutant. https://www.selleckchem.com/CDK.html Herein, MFe2O4@GO (M = Cu, Co or Ni) was synthesized via solution combustion method for the removal of dye molecules from aqueous solutions. The characteristics of the MFe2O4@GO, including surface area and pore diameter, surface functional groups, and elemental composition, were examined. Methylene blue was used as representative dye pollutant. Batch adsorption results conformed to the Langmuir isotherm. Maximum adsorption capacities of the MFe2O4@GO (M = Cu, Co or Ni) were 25.81, 50.15 and 76.34 mg g-1, respectively. Kinetics of methylene blue adsorption fitted the pseudo-second-order model. Overall, NiFe2O4@GO exhibited the highest adsorbent performance among the graphene-metal ferrites investigated, primarily because of its high specific surface area and presence of mesopores.Microplastics prepared from commercial marine antifouling paints were weathered by UV-C irradiation representing between 25 and 101 days of real-time, outdoor exposure. Attenuated Total Reflection Fourier Transform Infrared (ATR-FTIR) spectroscopy of the degraded paint particles showed that weathering induced chemical changes in the material, including the release of volatile components and the formation of hydrophilic groups. The chemical changes and increased reactivity of the paint binder were associated with alterations in their physical properties and increased leaching of metals in freshwater conditions. Changes in the spectra obtained from weathered paint samples reduced their match with spectra of unaged materials, resulting in a poorer similarity index, the Score when using automatic identification tools for microplastics. The results suggest that spectra of weathered, as well as pristine paint microplastics, should be consulted when applying analytical pipelines to identify microplastics extracted from natural matrices.Open-cast mining of coal generates waste material, including rock and soil with different minerals, and traditionally dumped as waste over the valuable lands worldwide. Overburden (OB) is devoid of actual soil characteristics, low micro and macronutrient content, and a sufficient amount of rare earth elements, silicate, sulphate, and clay minerals. This study aimed to determine the geochemistry and mineralogy of OB samples collected from Makum coalfield, Margherita of Northeast (NE) India. The geochemical and mineralogical analyses of overburden (OB) were carried out by using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), High resolution-inductively coupled plasma mass spectrometer (HR-ICP-MS), Field-emission scanning electron microscopy (FE-SEM) techniques. This study shows potentially hazardous elements (PHEs), including Pb, Co Cu, Cr, Ni, and Zn, and their association with minerals observed in OB samples. The major oxides (SiO2, Al2O3, Fe2O3, MgO, CaO, K2O, and Na2O) are present in all the overburden samples analyzed by the X-ray fluorescence (XRF) technique. Various minerals such as quartz, kaolinite, gypsum, melanterite, rozenite, hematite, and pyrite were identified. The overburden samples contain considerable amounts of rare earth elements and yttrium (REY; as received basis) with an average of 26.3 (ppm). The presence of abundant minerals and REY opens up a new avenue for the gainful and sustainable utilization of such waste materials.Harmful algal blooms (HABs) occur worldwide and threaten the quality of marine life, public health, and membrane facilities in Seawater Reverse Osmosis (SWRO) desalination plants. The effects of HABs on seawater desalination plants include extensive membrane fouling, increased coagulant consumption and plant shutdown. To determine how to mitigate such effects, this study assessed if low doses (0.01 mg/L, 0.10 mg/L, and 1.00 mg/L) of liquid ferrate (58% yield) and kaolin or montmorillonite clays alone could remove algal organic matter in coagulation-flocculation-sedimentation (CFS) pretreatment desalination systems. Results showed that 0.01 mg/L of liquid ferrate coagulant removed 42% of dissolved organic carbon (DOC), 52% of biopolymers (BP), 71% of algal cells, and 99.5% of adenosine triphosphate (ATP). At a dose of 0.01 mg/L, clays exhibited high removal of turbidity (up to 88%), BP (up to 80%) and algal cells (up to 67%). The combination of liquid ferrate (58% yield) as a coagulant with kaolin or montmorillonite clays as coagulant aids in CFS pretreatment led to 72% removal of DOC, 86% of BP, and 84% of algal cells with a fixed dose of 0.01 mg/L for each. Findings from this study can help SWRO plants improve the performance of pretreatment systems during algal bloom events by reducing the consumption of coagulants while also maintaining high removal efficiencies.Current approaches for Mechanochemical bromination (MCB) modified fly ash have been focusing on the efficiency and mechanism of mercury removal, but the MCB activation mechanism is still not clear. Selecting activated carbon (AC), hematite (He), anatase (An), and mullite (Mu) to simulate four main fly ash components, and the above samples were MCB modified by omni-directional planetary ball mill with NaBr crystal as modifier. Based on the physicochemical properties and mercury removal ability of each pure component before and after modification, the activation mechanism of MCB was obtained. The results indicate that single mechanochemical modification has almost no effect on the mercury removal ability of each component. The mercury removal ability of fly ash improved by MCB is mainly due to the C-Br generated by reaction between NaBr and AC, and the covalently bonded Br (M-Br) on He also provides a certain contribution. However, the contribution of An and Mu is a little. The MCB activation mechanism is verified that original AC and He are firstly converted into unsaturated carbon and He with surface lattice defects by MCB process, then react with Br free radicals to form C-Br and M-Br, while An and Mu do not mechanochemically react with NaBr during the MCB process.